Quantcast
Channel: Physical Insights » Australia
Viewing all articles
Browse latest Browse all 10

Blog Action Day

0
0

Well, long time no post. I hope all my readers are well.

So, apparently today is something called “Blog Action Day“, and this year the topic of interest is anthropogenic forcing of the climate system, and mitigating the potential thereof.

So, OK, I thought I’ll write a blog post about it. The day is supposed to be about action, as the name suggests, so let’s talk about specific actions, with a view towards making a significant mitigation, in a realistic way, of Australia’s anthropogenic carbon dioxide emissions.

Australia’s brown coal (lignite) fired electricity generators have by far the highest specific carbon dioxide emissions intensity per unit of electrical energy generated, since they’re burning relatively high moisture brown coal. They are the most concentrated point contributors to the anthropogenic GHG output. Therefore, these are the “low-hanging fruit” – a very valuable target to look at first and foremost if we want to make the greatest realistic mitigation of the country’s carbon dioxide emissions in a practical way, followed by black coal-fired generators.

Australia’s total net greenhouse gas emissions in 2006 were 549.9 million tonnes of CO2 equivalent.

If we look at the three main sets of lignite-fired generators in the Latrobe valley in Victoria, they represent a very concentrated point source of CO2 output, so they’re a very good case to focus on specifically.

In 2006, Hazelwood generated 11.6 TWh of electrical energy, and 16,149,398 tonnes of carbon dioxide to atmosphere.

In 2006, Loy Yang A generated 15.994 TWh of electrical energy sent out to the grid and 19,326,812 tonnes of carbon dioxide to atmosphere.

I’ll exclude Loy Yang B from this list for the moment, since its numbers are eluding me.

In 2006, the Yallourn power station generated 10.392 TWh of electrical energy sent out to the grid and 14,680,000 tonnes of carbon dioxide to atmosphere.

If you look at the the total contribution of just those three brown-coal-fired plants combined, you’re looking at 9.12 percent of Australia’s total anthropogenic carbon dioxide emissions. If you replace those with clean technology that can deliver an equivalent electricity output, you get a 9.12 percent reduction in Australia’s CO2 emissions. (When you include Loy Yang B, I think it’s approximately 11-12%.)

That’s not a bad target for Australia to implement for the relatively short term for a real reduction in CO2 emissions. It can actually be done, if the real political will exists to do it.

Now, I’m not interested in this “100% renewable energy by 2020″ business from the extremist any-excuse-for-a-protest Socialist Alternative set, because it is nonsense.

Replacing all the coal-fired and gas-fired generators in this country inside 10 years (and presumably only using wind turbines and solar cells, not nuclear energy of course since it doesn’t fit their para-religious ideology)? That’s complete bullshit, of course, because in the real world it cannot be done.

There’s a difference between setting a challenging target and setting a nonsense target. Unless you’re only trying to implement a political bullshit stunt instead of actually trying to hit your targets.

Of course, you don’t just close down the coal-fired generators. You’ve actually got to build their clean replacements first. So what do you use that can realistically replace a coal-fired power station? Nuclear power, of course.

Now, again, to be realistic, we probably can’t build LFTR/MSR, PBMR/HTGR, IFR/PRISM or any kind of nuclear fusion based generation capacity on a large scale to generate grid-connected energy right now. That’s not to say that pilot-scale research and development on those very cool technologies shouldn’t continue, but right now, getting more nuclear energy on the grid means advanced light water reactors – or maybe heavy water CANDU-type things, or conventional sodium-cooled fast reactors maybe. The most practical thing for serious deployment in the relatively short term is advanced LWR technology. In the slightly longer term, there is certainly a place to be encouraging both Gen. IV and fusion.

To get the same amount of energy as the total output from those coal plants, as above, which we’re talking about replacing, we need 4.56 GW of installed nuclear capacity, assuming a 95% capacity factor.

With 4 x 1154 MWe Westinghouse AP1000s, with a 95% capacity factor, you’ve got 4.62 GW, which is a little more than what’s needed.

You can easily have four nuclear power reactors integrated into one nuclear power plant.

Now, how much does it cost?

On March 27, 2008, South Carolina Electric & Gas applied to the Nuclear Regulatory Commission for a COL to build two AP1000s at the Virgil nuclear power plant in South Carolina. On May 27, 2008, SCE&G and Santee Cooper announced an engineering, procurement, and construction contract had been reached with Westinghouse. Costs are estimated to be approximately $9.8 billion for both AP1000 units, plus transmission facility and financing costs.

That gives you an idea of how much a nuclear power plant costs today, in the current financial environment, in the current regulatory environment.

If we double that figure of USD$9.8 billion, it’s AUD $21.4 billion. There will be some saving since we’re considering building four reactors at one plant, not two independent two-reactor plants.

How much that saving will be, quantitatively, I don’t really know. If the cost is reduced by 30%, we’re looking at 15 billion Australian dollars.

How long would it take? If the real political will exists to do it, 10 years is heaps of time. We could probably do even more in that timeframe if we really, really wanted to. AP1000 construction takes 36 months from first concrete poured to fuel load, if you ignore any political protest rubbish.

This is really just a base-line relatively achievable “base case”. After this decade, of course, the rate of nuclear power deployment – and related GHG emissions mitigation – could foreseeably accelerate.

What about the uranium input? About 600 tonnes of natural uranium per year total, for all four reactors. Australia’s present production, off the top of my head, is something like 10,000-11,000 tonnes. Australia’s present uranium production can very, very easily provide for Australia’s total electricity production even without expansion of uranium production – again, considering the inefficient once-through use of low-enriched uranium in conventional LWRs.

What about the so-called “waste”?
Roughly 80-85 tonnes of used uranium fuel per year. 96% of that is unchanged uranium, so that 76.8 tonnes of uranium can be seperated and re-used. It’s just uranium, so it’s not going to hurt you.

The remaining 3200 kg is made up of the valuable, interesting and unique byproduct materials from a nuclear reactor – unique resources with all kinds of different technological applications, which aren’t all radioactive, which you cannot get anywhere else.

Anyway, that’s one scenario which I happen to think has a lot of merit.

Maybe you don’t agree – but if you don’t agree, I’d love to see you elucidate an alternative scenario which can deliver the equivalent greenhouse gas emissions mitigation – shown to be accurate in a quantitative way – within a comparable timeframe and within a comparable cost.

It will not be inexpensive, and it will not happen overnight – but I have yet to see any scenario which can honestly do the same job faster and cheaper, when some real quantitative analysis is applied.



Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images